Application areas
About Emcomp
Contact
  • Home page
  • Our products
  • Accessories

Product Categories

  • Our products
    • Accessories
      • Sealing Boots
      • Mounting bracket for DIN rail
      • Surface mounting bracket for DD-frame
      • Handle lock
      • Escutcheon blanks
      • Front mounting for RCBO
  • Sealing Boots

    Emcomp offers a complete range of sealing boots for CBI circuit breakers. By complementing the installation with patented silicone rubber boots, you achieve a very robust design with an IP rating of up to IP66/IP68. Typical applications: • Marine & Offshore • Oil & Gas • Military • Medicine • Other applications where it is vital to protect CBI circuit breakers from environmental impact

  • Mounting bracket for DIN rail

    Our battery circuit breaker, the DD-frame, is a CBE product. CBE stands for “Circuit Breaker for Equipment”, which is intended for mounting in a front cover or similar. If you would like to install this type of circuit breaker in a traditional DIN rail system we have developed an adapter for this. The reason to mount a DD-frame in a DIN rail system can be for instance; You need a higher rated current than what’s available with traditional MCBs? DD-frame can operate up to 400A in DC configuration. Maybe you wish to in an easy way remotely control a load? The DD-frame can be supplied with the compact and efficient motorized module RAU – Remote Actuation Unit.

  • Surface mounting bracket for DD-frame

    Our battery circuit breaker, the DD-frame, is a CBE product,. CBE stands for “Circuit Breaker for Equipment”, which is intended for mounting in a front cover or similar. If you would like to use a DD-frame in an easy way but are missing front plate/enclosure to mount it in we have developed a bracket that easily can be mounted on any flat surface. It is made of very durable Aluzinc steel. Application example is for instance if you have a battery system or similar that you wish to protect but you have no enclosure or maybe limited space in your existing enclosure. The recommended usage is one holder for a single pole breaker and two holders for 2-5 pole breakers.

  • Handle lock

    Do you need to ensure that the breaker is not tripped unintentionally? Emcomp has a solution! A handle lock for the Q series. Emcomp's 13 and 26 mm wide MCB range, the Q series, has a special lock that make it possible to lock the handle in the on or off position. The lock can be further secured with a pad lock if necessary. This can be valuable if you have a load that not should be switched off, or vice versa, if you have a load that absolutely not should be switched on, for instance during maintenance work etc.

  • Escutcheon blanks

    In the cases when a distribution is not fully equipped with circuit breakers it can be of interest to cover the empty slots with a “dummy plate” or escutcheon blank as we say. This can be of interest both from a safety point of view as well as for better appearance. We have ready solutions for both our rail mounted products with 57 mm front escutcheon as well as for the most of the front mounted CBE products.

  • Front mounting for RCBO

    The very popular RCBO, QF17A, is a component intended for mounting on traditional DIN or mini rail. However, we have developed an adapter which makes it possible to mount in a front cover instead. We have been involved in several projects that would like to utilize the unique features of the QF17A (not sensitive to temperature, compact dimensions, both UL and VDE approval etc.) but for mounting into an enclosure with other front mounted components.

About Emcomp

Emcomp International AB provides electrical components and customized solutions for harsh environments. Examples of such environments are high/low ambient temperatures, dirt, moisture and EX-classified environments. Deliveries of products take place from our warehouses in Sweden or Hong Kong. Quality awareness and attentive service make us the customer's first choice.

 

 

 

Contact Us

Contact

About Emcomp

Company information and T&C

Emcomp International AB

Tomtagatan 17

702 32 Örebro, Sweden

Quick links

FAQ

News

Newsletter

The CBI HY-MAG principle

Application areas

+46 (0)581 62 15 50 info@emcomp.se