Escutcheon blanks

In the cases when a distribution is not fully equipped with circuit breakers it can be of interest to cover the empty slots with a “dummy plate” or escutcheon blank as we say. This can be of interest both from a safety point of view as well as for better appearance. We have ready solutions for both our rail mounted products with 57 mm front escutcheon as well as for the most of the front mounted CBE products.

Do you want to know more about our products, please subscribe to our newsletter

When you subscribe to our newsletter we will save your e-mail address in our system. You can always unsubscribe in the link in the newsletter or e-mail us at info@emcomp.se

Valid email is required

Your message has been sent

Our most popular version of the B-frame is the version with rocker handle which is snapped into place in a square front hole. Here we have a cover that either can be snapped into place just like the circuit breaker but also fixed at the terminals in the cases when you to not have any frame in the front. 
Part number: EC204704-2 
 

We also have a cover for the DD-frame range. When installed it will make a flat surface with the enclosure and have the same finish as the circuit breaker. It is installed with the same type of M3 screws as the circuit breaker. The M3 inserts are included with the escutcheon blank. 
Part number: 3250001 
 
We also have cover solution for our rail mounted MCBs with 57 mm front escutchon. It consist of a square flexible panel wich is snapped into the escutcheon where there is empty positions. Each panel consists of 12 modules, each 6,5 mm wide, which can be broken off to fit the space required. Meaning it will fit both MCBs with 13 mm modular width as well as 26 mm. Also versions with or without the 6,5 mm wide auxilliary switch. 

Part number: 2356208 

Part Number

Description

Specification

EC204704-2

B-frame

rocker handle

3250001

DD-frame

standard handle

2356208

Q-frame

57mm front escutcheon

File name

File type

File size

Download

EC204704-2_drawing_emcomp
pdf
98 KB
3250001_drawing_emcomp
pdf
140 KB